Last Updated: November 15, 2026
Quick Summary
The best water filters for your home depend on local water quality, installation requirements and long-term cartridge costs. Choose reverse osmosis for fluoride or PFAS reduction, a 3 Stage Under Sink Kit for chlorine and taste, or a whole-house system for broad protection. Always compare cartridge replacement intervals, as lower upfront prices can result in higher costs over a five-year period.
- The 5 Stage Reverse Osmosis System costs $494.99 and suits households requiring fluoride reduction via a dedicated tap.
- The tankless unit at $899.99 provides high-flow filtration and reduces PFAS, PFOA and PFOS.
- The 3 Stage Under Sink Kit at $189.99 requires cartridge changes every 3 to 5 months depending on sediment levels.
- The Whole House Filtration Bundle at $1,699.99 handles up to 50 litres per minute for taps and appliances.
- Flush any new system for five minutes after installation to clear carbon fines.
Table of Contents
- How to Choose the Best Water Filter for Home Use
- Water Filters Compared: Systems, Prices and What They Remove
- Choosing an Under-Sink Water Filter That Fits Your Kitchen
- Water Filter Installation: What Each System Actually Requires
- Water Filter Cartridge Replacement and Whole-of-Life Costs
- Matching a Filter to Your Water Source and Contaminant Concerns
- See the Filters in Person at the Showroom
- Frequently Asked Questions
How to Choose the Best Water Filter for Home Use
Selecting a water filter requires balancing your specific water quality concerns with available space and ongoing maintenance budgets. According to Water Services Association of Australia guidelines on water quality, public water supplies are treated for safety, yet individual preferences for taste and specific contaminant removal often drive the decision to install point-of-use systems. This guide evaluates the primary systems available, detailing purchase prices and performance limitations to assist in your selection.
Most consumers prioritise taste, but effective filtration depends on matching the technology to the target contaminants. A simple jug filter differs significantly from a multi-stage reverse osmosis system in its removal capacity.
Water Filters Compared: Systems, Prices and What They Remove
This comparison uses five key criteria: purchase price, flow capacity, cartridge lifespan, contaminant reduction, and estimated five-year maintenance costs. Prices are in AUD.
| System | Price (AUD) | Rated capacity / flow | Cartridge life | Contaminants (reduced unless stated) | Est. 5-year cartridge cost |
|---|---|---|---|---|---|
| 5 Stage Reverse Osmosis System | $494.99 | Up to ~378 L/day | Pre-filters ~6 months; membrane 2-3 years | Fluoride, chlorine, sediment, heavy metals, pesticides | Moderate, pre-filter sets plus one membrane |
| Ultra Tankless Reverse Osmosis | $899.99 | 800 GPD; glass in ~3 seconds | Pre-filters ~6-12 months; membrane 2-3 years | PFAS, PFOA, PFOS, heavy metals, dissolved solids, chlorine | Moderate, fewer cartridge changes, higher unit price |
| 3 Stage Under Sink Kit | $189.99 | Household tap flow | 3-5 months | Chlorine, sediment, rust, organic chemicals | Low, frequent but inexpensive cartridges |
| Whole House Filtration Bundle | $1,699.99 | Up to 50 L/min | 6-12 months | Sediment, chlorine, taste and odour; optional antibacterial and fluoride stages | Moderate to high, large cartridges |
| Gravity-Fed Stainless Steel Filter | $490.00 | Gravity flow (no plumbing) | Ceramic candle cleanable; replace when flow drops | Bacteria, parasites, heavy metals, sediment | Very low, cleanable candle |
Price (AUD)
Awesome Water 5 Stage Reverse Osmosis System
At $494.99, this system is a standard choice for households requiring fluoride reduction via a dedicated drinking tap. It includes five filtration stages and a pressurised storage tank. Note that installation requires sufficient cupboard space for the unit and tank, as well as an additional tap hole on the benchtop.
Best for: households requiring a dedicated drinking water tap. Skip if: cupboard space is limited.
Awesome Ultra Tankless Reverse Osmosis System
At $899.99, this tankless unit is designed for compact spaces. It is engineered to reduce PFAS, PFOA and PFOS. As noted by Australian Drinking Water Guidelines, understanding your local water profile is essential when selecting a system for specific chemical reduction.
Best for: large households and compact cabinetry. Skip if: your mains water pressure is insufficient for a tankless system.
3 Stage Under Sink Water Kit
At $189.99, this kit is an entry-level option for removing chlorine, sand, silt, dirt and rust. It is a common choice for improving the aesthetic quality of tap water.
Best for: renters and budget-conscious households. Skip if: you require specific reduction of fluoride or heavy metals.
Whole House Filtration Bundle
At $1,699.99, this system is plumbed into the mains supply at a flow rate of up to 50 litres per minute, providing filtered water for showers, laundry and appliances.
Best for: larger homes and small businesses. Skip if: you only require filtered water at a single point-of-use.
Gravity-Fed Stainless Steel Water Filter
At $490.00, this unit operates without power or plumbing. The ceramic candle is cleanable, which extends the life of the filter.
Best for: emergency preparedness and off-grid use. Skip if: you prefer the convenience of mains-pressure water on demand.
How to read the comparison honestly
Always calculate the total cost of ownership by multiplying the cartridge price by the number of replacements required over five years. A lower initial purchase price may be offset by frequent, expensive cartridge replacements.
Choosing an Under-Sink Water Filter That Fits Your Kitchen
Before purchasing, measure the height, depth and width of your cupboard space. Account for the cartridge housing and, if applicable, the storage tank. Verify whether your benchtop can accommodate an additional faucet hole for a dedicated drinking tap. For further guidance, consult our under sink buying guide.
Water Filter Installation: What Each System Actually Requires
Under-sink systems connect to the cold-water line and may require a drain connection. Use a licensed plumber to ensure compliance with local plumbing standards. Whole-house units require installation on the main supply line. After installation, flush the system for five minutes to remove any loose carbon fines.
Water Filter Cartridge Replacement and Whole-of-Life Costs
Cartridge life is dictated by water quality and usage volume. The 3 Stage Under Sink Kit typically requires replacement every 3 to 5 months. Always factor these recurring costs into your budget at the time of purchase.
Matching a Filter to Your Water Source and Contaminant Concerns
Selecting the right filter depends on your water source: mains, rainwater or bore.
Mains water
Mains water is treated for safety, so the primary concerns are chlorine, chloramines, sediment and taste. A carbon-based system or reverse osmosis is generally effective here.
Rainwater tanks
Tank water requires filtration and disinfection (such as UV treatment) to address bacteria and parasites. Carbon filters improve taste but do not disinfect. According to Australian Government health advice on tank water, regular maintenance of roofs and gutters is critical for water quality.
Bore water
Bore water composition varies based on local geology. Common issues include hardness, iron and manganese. Test your water before choosing a system, as standard sediment filters will not remove dissolved minerals.
How to find out what is in your water
Request the latest water quality report from your local water utility. For private sources like bores or tanks, use a NATA-accredited laboratory for testing rather than relying on basic test strips.
Matching the system to the source
| Source | Typical concerns | Suitable system type | What it will not fix |
|---|---|---|---|
| Mains | Chlorine, sediment, taste and odour, fluoride if present | Carbon block or reverse osmosis | Does not soften hard water unless specified |
| Rainwater tank | Bacteria, parasites, sediment, organic matter | Sediment and carbon pre-filter plus UV disinfection | Carbon alone does not disinfect |
| Bore | Hardness, iron, manganese, dissolved solids | Test first; reverse osmosis with pre-treatment | Sediment filters do not remove dissolved contaminants |
See the Filters in Person at the Showroom
Visit our Sydney showroom to inspect our range of filtration systems. You can view the under sink water filtration range or specific models like the 5 Stage Reverse Osmosis System online before visiting.
Choosing a water filter should be based on your specific water quality and installation constraints. If you require advice on fluoride, PFAS or whole-house solutions, Awesome Water® provides expert support.
Frequently Asked Questions
What type of water filter is best for home use?
It depends on your requirements. For fluoride and heavy metals, a reverse osmosis system is recommended. For chlorine and taste, a 3 Stage Under Sink Kit is often sufficient. Households needing filtered water at every tap should consider a whole-house system.
How often should water filter cartridges be replaced?
Replacement intervals vary by system and water quality. The 3 Stage Under Sink Kit typically requires changes every 3 to 5 months. Always refer to your specific product manual for maintenance schedules.
Do water filters need to be professionally installed?
Benchtop and gravity-fed filters do not require installation. Under-sink and whole-house systems connect to plumbing and should be installed by a qualified plumber to ensure compliance with local regulations.
Are under-sink water filters suitable for rental kitchens?
Check with your landlord before installation. If drilling is not permitted, consider a benchtop or gravity-fed system as a portable, non-permanent alternative.


